Unipipe: Choosing the Right Aluminium Pipe System for Your Application
Choosing the right pipework material is about more than finding a pipe that can handle the pressure. The material, fittings, connection design and operating environment all affect how a system performs over time.
For industrial compressed air systems, aluminium has become a practical alternative to traditional materials such as galvanised steel and carbon steel. It's lightweight, corrosion-resistant, easy to handle and available in modular configurations that can adapt as a facility changes.
Unipipe is an aluminium pipework system designed for compressed air, nitrogen, oil and vacuum applications, with standard and high-pressure options available. Its combination of lightweight pipe, mechanical fittings and modular design makes it worth considering for new systems, factory upgrades and production line extensions.
But aluminium isn't automatically the right choice for every application. Understanding the differences between materials, pressure ratings and fitting designs helps you select a system that suits the job.
Why Does Pipework Material Matter in High-Pressure Systems?
Pipework material affects pressure capability, corrosion resistance, weight, maintenance requirements and the long-term reliability of an industrial system.
In a compressed air installation, the pipe and fittings must handle more than normal operating pressure. They also need to suit the system's operating temperature, pressure fluctuations, vibration and environmental conditions.
The connection between the pipe and fitting deserves particular attention. A fitting may be exposed to mechanical loads as the system starts, stops and cycles through different operating conditions.
When comparing materials, consider:
-
Pressure rating: Is the complete pipe and fitting configuration rated for the required operating pressure?
-
Temperature: Does the system maintain its rated performance at the expected operating temperature?
-
Corrosion resistance: Will moisture, condensation, chemicals or the surrounding environment affect the material?
-
Weight: How much structural support will the pipework require?
-
Maintenance: Can sections be accessed, replaced or modified without extensive rework?
-
Future expansion: Can the system accommodate new machinery, production lines or changes to the factory layout?
The right choice depends on the application. A high-pressure hydraulic circuit has different requirements from a factory compressed air network, so material comparisons need to be made in context.
Which Materials Are Commonly Used for Industrial Pipework?
Steel, stainless steel and aluminium each have different strengths. The best option depends on the pressure, medium, environment and design requirements of the system.
| Material | Main advantages | Considerations |
|---|---|---|
| Carbon steel | Strong and widely used in industrial applications | Can corrode when exposed to moisture; protective coatings and maintenance may be required |
| Galvanised steel | Zinc coating provides corrosion protection in suitable environments | Coating condition and internal corrosion need consideration over the system's service life |
| Stainless steel | Good corrosion resistance, with grade selection important for the environment | Generally heavier and more expensive than aluminium |
| Aluminium | Lightweight, corrosion-resistant and suitable for modular pipework systems | Must be selected according to the system's pressure, temperature and application ratings |
Carbon steel and galvanised steel
Steel pipework is widely used across industrial facilities. It can be suitable for demanding applications, but corrosion is an important consideration, particularly in compressed air systems where moisture and condensation may be present.
Corrosion inside a compressed air network can contribute to contamination, restrictions and maintenance issues. External corrosion can also affect pipe condition and support requirements.
Stainless steel
Stainless steel is often selected where corrosion resistance and material compatibility are priorities. Different grades offer different levels of corrosion resistance, so the grade needs to match the environment and process requirements.
For applications involving water, chemicals or more demanding operating conditions, stainless steel pipework may be the more appropriate option.
Aluminium
Aluminium offers a different combination of benefits. It's lighter than steel, naturally forms a protective oxide layer and can be supplied as a modular pipework system.
For compressed air distribution, these characteristics can make aluminium an attractive option where installation access, future changes and reduced corrosion-related maintenance are important considerations.
What Makes Unipipe Aluminium Pipework Different?
Unipipe combines lightweight aluminium pipe with mechanical fittings to create a modular industrial piping system.
Unlike traditional pipework methods that may involve extensive threading, welding or fabrication, Unipipe uses mechanical connections and can be assembled with common tools. This makes it a practical option for facilities that need to modify or extend their pipework over time.
Key features include:
Lightweight aluminium construction
Aluminium pipe is easier to handle than comparable steel pipework. This can make a difference when working across large facilities, elevated pipe runs or areas with restricted access.
Modular design
The system can be configured to suit different layouts. Sections can be modified, extended or reused when production requirements change, subject to the condition and compatibility of the components.
Corrosion resistance
Aluminium naturally forms a protective oxide layer. Unipipe also uses specified surface treatments on its pipe and fittings to provide additional protection.
Simple mechanical connections
The fittings are designed to connect without welding or threading the pipe. Assembly uses common tools rather than specialist fabrication equipment.
Different system configurations
Unipipe is available in options for standard-pressure compressed air, high-pressure compressed air, nitrogen, oil and vacuum applications.
Together, these features make Unipipe worth considering for industrial facilities looking for a flexible alternative to conventional metal pipework.
What Pressure Ratings Are Available for Unipipe?
Unipipe is available in different configurations, with pressure ratings that depend on the specific product range.
Selecting the correct range is essential. A standard compressed air system and a high-pressure application have very different requirements.
| Unipipe range | Application | Published pressure rating |
|---|---|---|
| UnipipeAIR | Compressed air | Up to 16 bar |
| UnipipeNITRO | Nitrogen and inert gases | Up to 16 bar |
| UnipipeOIL | Oil and lubrication applications | Product-specific rating, with 70 bar fittings available |
| UnipipeVAC | Vacuum systems | Up to -0.87 bar |
| UnipipeHP | High-pressure air and gas applications | Up to 70 bar, depending on configuration |
These are product-range ratings, not a guarantee that every pipe size, fitting or configuration can operate at the maximum pressure shown. The complete system must be selected according to the manufacturer's specifications, including operating temperature and the medium being conveyed.
What about Unipipe's high-pressure testing?
Unipipe has a distinctive internal-nut fitting design. Rather than relying on an external nut arrangement, the securing mechanism is positioned within the fitting.
This design is engineered to provide increased resistance to pressure-related fitting blow-off.
Air Energy has also documented destructive testing in which a high-pressure tube split at 535 bar without leakage or failure of the fitting. Separate testing recorded standard pipe burst pressures of 202.9 bar at 100°C and 243.2 bar at -30°C.
These results demonstrate the performance observed under those specific test conditions. They are not operating pressure ratings. The maximum working pressure must always be taken from the rating for the exact pipe and fitting configuration being used.
Why Is the Fitting Design Important?
A pipework system is only as dependable as its connections. The fitting needs to grip and seal the pipe correctly while handling the forces generated during operation.
Unipipe uses an internal-nut design that differs from external-nut arrangements used in some other aluminium piping systems.
The internal-nut configuration is engineered to increase resistance to the fitting being forced off the pipe under pressure. This is particularly relevant when selecting a system for higher-pressure applications.
The fitting design also supports the modular nature of the system. Mechanical connections allow sections of pipework to be assembled and reconfigured without the need for welding or threading the pipe.
As with any mechanical pipework system, correct preparation, assembly and inspection remain essential. The manufacturer's instructions must be followed, and the complete installation needs to be checked and tested in accordance with the applicable requirements.
Where Can Unipipe Be Used?
Unipipe has several configurations for industrial applications, but the selected product must match the medium and operating conditions.
Common applications include:
Compressed air distribution
UnipipeAIR is designed for compressed air networks supplying production equipment, pneumatic tools, machinery and other factory operations.
High-pressure air and gas
The UnipipeHP range provides options for applications requiring higher operating pressures, with configurations rated up to 70 bar.
Nitrogen and inert gases
The UnipipeNITRO range is designed for nitrogen and inert gas distribution within its specified operating limits.
Oil and lubrication systems
Specific Unipipe components are available for oil applications. Fluid compatibility, pressure and temperature limits should be confirmed before selecting the system.
Vacuum systems
The UnipipeVAC range is designed for vacuum applications, with pipe and fittings rated for the specified vacuum conditions.
Not every Unipipe component is suitable for every medium. Always check the manufacturer's technical documentation before specifying a system for a particular gas or fluid.
How Do You Choose Between Aluminium, Stainless Steel and Carbon Steel?
Start with the operating requirements, not the material preference.
Aluminium can be a practical choice for compressed air distribution, particularly where low weight, modularity and corrosion resistance are priorities. Stainless steel may be more suitable where the process requires specific corrosion resistance or material compatibility. Carbon steel may remain appropriate for certain industrial applications where its mechanical properties and system requirements make sense.
Before selecting a pipework material, work through these questions:
-
What medium will the system carry? Compressed air, nitrogen, oil, water and other fluids have different compatibility requirements.
-
What is the maximum operating pressure? Include normal operating pressure and any relevant pressure fluctuations.
-
What temperatures will the system experience? Check the rated temperature range for the complete pipe and fitting configuration.
-
What is the operating environment? Consider moisture, condensation, chemicals, washdown requirements and outdoor exposure.
-
Will the system need to change? Future production lines, machinery relocations and factory expansions can influence the best pipework choice.
-
What documentation is available? Confirm product ratings, technical specifications and any applicable compliance requirements.
A material that performs well in one application may be unsuitable in another. The complete system needs to be assessed rather than selecting pipe based on material or pressure rating alone.
Is Unipipe a Good Choice for Your Facility?
If you're looking at a new compressed air network, upgrading older pipework or extending an existing system, Unipipe offers a lightweight and modular aluminium option.
Its standard and high-pressure configurations provide flexibility across different operating requirements. The internal-nut fitting design, corrosion-resistant construction and ability to modify sections of pipework are useful considerations for facilities where production layouts can change.
The important part is matching the correct pipe, fittings and configuration to the application.
Air Energy supplies Unipipe products Australia-wide and can help with product selection, pipe sizing and technical information to help you assess the right configuration for your project.
Frequently Asked Questions About Unipipe
What is Unipipe?
Unipipe is a modular aluminium pipework system designed for industrial applications including compressed air, nitrogen, oil and vacuum. It uses mechanical fittings and lightweight aluminium pipe, with different configurations available for different operating pressures and applications.
How much pressure can Unipipe handle?
The standard compressed air and nitrogen ranges are rated up to 16 bar, while the UnipipeHP range offers configurations rated up to 70 bar. The exact rating depends on the pipe, fitting and operating conditions. Always confirm the manufacturer's specifications before selecting a system.
Is aluminium suitable for industrial compressed air?
Yes, purpose-designed aluminium pipework systems are used for industrial compressed air distribution. Aluminium is lightweight and naturally corrosion-resistant, making it a practical option for many factory air networks. The system still needs to be specifically rated for compressed gas service and the required operating conditions.
Can Unipipe be modified or reused?
Unipipe's modular mechanical connections allow sections to be modified, extended or reused when a facility's requirements change. Reused components must be inspected and confirmed as suitable for the new configuration, following the manufacturer's instructions.
Does Unipipe require specialist installation tools?
Unipipe is designed to be assembled using common tools rather than requiring welding or threading equipment. The manufacturer's assembly instructions must still be followed to ensure connections are correctly made and inspected.
Need Help Selecting Unipipe for Your Application?
Choosing an industrial pipework system involves more than comparing materials and pressure ratings. You need to consider the medium, operating conditions, fitting design and what the facility may need in the future.
Air Energy supplies Unipipe aluminium pipe and fittings Australia-wide. Our team can help you review your requirements, select suitable components and work through pipe sizing and technical questions.
Talk to Air Energy on 1300 99 55 26 or explore the Unipipe range.