Unipipe: Why Flexible Air Hoses Aren't a Long-Term Pipework Solution
Flexible air hoses are useful in industrial workplaces. They connect pneumatic tools, supply air to moving machinery and give operators the freedom to work where fixed connections aren't practical.
But there's a difference between using a hose for its intended purpose and relying on flexible hoses to distribute compressed air throughout an entire factory.
Long lengths of flexible hose used as permanent air lines can create problems with leaks, restricted airflow, physical damage and ongoing maintenance. They can also introduce safety risks if the hose or its connections fail under pressure.
Unipipe aluminium pipework provides a modular alternative for permanent compressed air distribution, helping facilities replace unsuitable lengths of flexible hose with purpose-designed pipe and fittings.
The goal isn't to eliminate every hose from your workplace. It's to use the right connection for the job: fixed pipework for air distribution and suitable flexible hoses where movement or vibration makes them necessary.
Why Are Flexible Hoses a Problem in Permanent Compressed Air Systems?
Flexible hoses are designed to provide movement and flexibility, but they aren't always the best choice for distributing compressed air across a facility.
A hose connected to a pneumatic tool is doing a different job from a long hose running along a factory wall, across a production area or between multiple workstations.
When hoses are used as permanent distribution lines, several problems can develop:
-
Air leaks: Hose material can deteriorate, while joints and couplings can loosen or wear.
-
Restricted airflow: Kinks, tight bends and undersized hoses can restrict the amount of air reaching equipment.
-
Physical damage: Hoses can be crushed, abraded, driven over or damaged by machinery.
-
Trip hazards: Hoses running across floors and walkways create obstacles for workers and equipment.
-
Maintenance requirements: Damaged hoses and connections need regular inspection, repair or replacement.
-
Safety risks: A failed or disconnected pressurised hose can whip or move unpredictably, potentially injuring nearby workers.
These issues don't mean flexible hoses should never be used. They mean hoses need to be selected for the application and shouldn't automatically become a substitute for properly designed permanent pipework.
How Can Flexible Hoses Affect Compressed Air Efficiency?
Leaks and restrictions in a compressed air network can increase energy consumption and reduce the performance of equipment.
Compressed air is an expensive utility to produce. When air escapes through damaged hoses, worn connections or poorly maintained fittings, the compressor must supply additional air to compensate for the loss.
Even small leaks can become expensive when they occur across multiple connections throughout a facility.
Restricted airflow creates a different problem. A hose that's too small, kinked or unnecessarily long can contribute to pressure loss between the compressor and the equipment.
Operators may notice:
-
Pneumatic tools that don't perform consistently.
-
Equipment that takes longer to complete a task.
-
Pressure variations between different workstations.
-
Compressors running more frequently to maintain system pressure.
-
Production equipment struggling during periods of high air demand.
One common mistake is increasing compressor pressure to compensate for poor distribution. This can increase energy consumption without fixing the underlying problem.
Before changing compressor settings, investigate the pipework layout, pipe sizing, leaks, fittings and airflow requirements.
What Are the Safety Risks of Using Flexible Air Hoses?
The main safety concern is what happens when a pressurised hose or connection fails.
If a hose disconnects while compressed air is flowing, it can move violently. This is commonly known as hose whip. Depending on the pressure, hose size and surrounding conditions, the consequences can include impact injuries and damage to nearby equipment.
Other risks include:
Trip and access hazards
Hoses left across walkways, work areas and vehicle routes can create trip hazards. They may also be damaged by forklifts, trolleys or other equipment.
Hose deterioration
Repeated movement, abrasion, heat, chemicals and environmental exposure can weaken hose materials. Damage isn't always obvious from a distance.
Incorrect connections
Using fittings, clamps or couplings that aren't suitable for the hose or operating pressure can increase the risk of a connection failure.
Poor hose management
Without a clear inspection and replacement process, damaged hoses can remain in service longer than they should.
WorkSafe Victoria recommends replacing flexible hoses with permanent hard-piped lines where reasonably practicable. Where hoses remain necessary, they should be selected according to their intended service and operating conditions, inspected regularly and fitted with appropriate restraints where hose whip is a risk.
For more information, see WorkSafe Victoria's guidance on the safe selection and use of flexible hose assemblies.
Should You Replace Every Flexible Hose with Rigid Pipework?
No. Flexible hoses still have an important role in industrial compressed air systems.
The important distinction is between permanent air distribution and the final connection to equipment.
A fixed pipework network is generally more suitable for carrying compressed air around a factory and supplying individual workstations. Flexible hoses are useful where equipment needs to move, vibrate or be disconnected for maintenance.
| Application | More suitable option |
|---|---|
| Main compressed air distribution around a factory | Purpose-designed rigid pipework |
| Long air supply runs between production areas | Purpose-designed rigid pipework |
| Fixed drops supplying workstations | Rigid pipework with suitable outlet connections |
| Connecting a pneumatic tool to an air outlet | Correctly rated flexible hose |
| Connecting equipment that moves during operation | Suitable flexible connection |
| Equipment subject to vibration | Engineered flexible connection where required |
| Temporary compressed air supply | Suitable rated hose assembly, with appropriate controls |
The best arrangement often combines both.
Use a properly sized pipework network to distribute air throughout the facility, then use correctly rated hoses for the final connection where movement or flexibility is required.
This gives you a more organised distribution system without sacrificing the flexibility operators need.
Why Choose Unipipe Aluminium Pipework for Compressed Air?
Unipipe is a modular aluminium pipework system designed for industrial applications, including compressed air distribution.
It provides an alternative to traditional steel pipework and long lengths of flexible hose used as permanent air lines.
There are several reasons aluminium pipework is worth considering.
Lightweight construction
Aluminium is considerably lighter than comparable steel pipework. This makes the pipe easier to handle and can simplify planning for overhead pipe runs and factory distribution networks.
Corrosion resistance
Aluminium naturally forms a protective oxide layer, helping resist corrosion. This is an important consideration in compressed air systems where moisture and condensation can be present.
Modular connections
Unipipe uses mechanical fittings rather than requiring pipe connections to be welded or threaded. This allows the system to be configured around the facility's layout and modified when requirements change.
Smooth internal surface
A smooth internal pipe surface helps reduce friction-related pressure losses. However, actual pressure drop depends on pipe diameter, airflow, pipe length, fittings and the overall network design.
Correct pipe sizing is still essential.
Flexible system design
Unipipe components can be used to create a distribution network that supplies different production areas and workstations. Additional outlets and pipe sections can be incorporated as the facility changes, provided the components and system design remain suitable.
For facilities looking to replace unsuitable permanent hose runs, these features make Unipipe a practical option to investigate.
How Does Unipipe Compare with Flexible Air Hoses?
The two products serve different purposes, so it's important to compare them based on the job they're expected to perform.
| Consideration | Flexible air hoses | Unipipe aluminium pipework |
|---|---|---|
| Main purpose | Flexible connections and point-of-use air supply | Permanent compressed air distribution |
| Movement | Designed to bend and move | Fixed pipework configuration |
| Physical damage | Can be vulnerable to abrasion, crushing and repeated movement | Requires suitable support and protection but isn't subject to the same hose-related wear |
| Airflow | Can be restricted by kinks, bends and incorrect sizing | Can be designed around pipe diameter, airflow and pressure requirements |
| Maintenance | Requires regular inspection for wear, damage and connection problems | Requires inspection of pipework, fittings and supports |
| Future changes | Easy to move but may create temporary or untidy distribution arrangements | Modular sections can be extended or reconfigured |
| Best application | Moving equipment, pneumatic tools and flexible connections | Main distribution lines and fixed workstation supplies |
The key advantage isn't that aluminium pipework replaces every hose. It's that a purpose-designed distribution network gives compressed air a more reliable route around the facility.
What Should You Consider Before Upgrading Your Compressed Air Pipework?
Replacing permanent hose runs with a fixed pipework system requires more than choosing a pipe material.
The network needs to deliver the required airflow and pressure to each point of use.
Before selecting a system, consider the following.
1. Operating pressure
Determine the normal operating pressure and the maximum pressure the system may experience. Every pipe, fitting and connection needs to be suitable for the intended operating conditions.
2. Airflow requirements
Consider the air demand of individual machines and the combined demand when multiple machines operate simultaneously.
3. Pipe diameter
Undersized pipework can contribute to pressure loss and restrict airflow. Pipe sizing should account for flow, length, fittings and future demand.
4. Network layout
Look at the route from the compressor to the production areas. Consider branch lines, isolation points, workstation outlets and opportunities to improve access.
5. Existing hoses and connections
Identify which hoses are being used for permanent distribution and which are required for moving equipment. The aim is to replace unsuitable applications, not remove useful flexibility.
6. Future expansion
Consider whether the facility may add machinery, relocate production lines or increase compressed air demand. A modular system can make future changes easier to accommodate.
7. Safety and maintenance
Review existing hose inspection processes, damaged connections, hose restraints, pipe supports and access around workstations.
A well-designed compressed air network should support the way your facility operates today while allowing for changes in the future.
Can Unipipe Help Reduce Compressed Air Leaks?
Unipipe provides a purpose-designed mechanical pipework system, but no pipework material or connection method can guarantee a leak-free compressed air network.
Leak performance depends on correct component selection, pipe preparation, assembly, installation quality, operating conditions and ongoing maintenance.
Replacing damaged or unsuitable hose assemblies with correctly specified permanent pipework can remove some common sources of leakage. However, existing leaks elsewhere in the system still need to be identified and repaired.
A compressed air leak survey can help locate losses around pipe joints, fittings, valves, couplings, hoses and equipment connections.
Air Energy can also assist with compressed air audits and pipework reviews to help identify opportunities to improve an existing system.
Is Unipipe the Right Choice for Your Compressed Air System?
If your facility relies on long lengths of flexible hose to distribute compressed air, it may be worth reviewing whether a fixed aluminium pipework network would be a better long-term solution.
Unipipe offers lightweight aluminium pipe, mechanical fittings and modular components for industrial compressed air distribution.
It can be considered for:
-
New factory compressed air networks.
-
Replacing unsuitable permanent hose runs.
-
Extending existing compressed air systems.
-
Supplying fixed production lines and workstations.
-
Facilities where production layouts change over time.
The correct configuration depends on the required pressure, airflow, pipe sizing and operating environment. Unipipe is available in different product configurations, so check the manufacturer's specifications before selecting components.
Frequently Asked Questions About Unipipe and Flexible Air Hoses
Are flexible hoses suitable for permanent compressed air pipework?
Flexible hoses can be suitable for specific applications, but they aren't always the best option for permanent air distribution. Long hose runs can be vulnerable to leaks, physical damage, kinks and trip hazards. Purpose-designed rigid pipework is generally preferable where a fixed distribution line is reasonably practicable.
What is the advantage of Unipipe aluminium pipework?
Unipipe uses lightweight aluminium pipe and mechanical fittings to create a modular distribution system. Its corrosion-resistant construction, smooth internal surface and flexible system configuration make it an option for industrial compressed air networks.
Should I remove all flexible hoses from my factory?
No. Flexible hoses are still useful for pneumatic tools, moving equipment and connections where vibration or movement needs to be accommodated. The focus should be on replacing unsuitable permanent hose runs while retaining correctly selected and maintained hoses where they're needed.
Can flexible hoses cause pressure loss in a compressed air system?
Yes. Kinks, tight bends, undersized hoses, long runs and leaking connections can contribute to pressure loss or restricted airflow. Correct hose selection and pipe sizing are important for maintaining the required pressure at the point of use.
Can Unipipe be extended when a factory expands?
Unipipe's modular design allows compatible pipework sections and fittings to be incorporated into an existing network. Any extension needs to be checked for pressure rating, pipe sizing, airflow capacity and compatibility with the existing system.
Looking for a Better Way to Distribute Compressed Air?
Long lengths of flexible hose might seem like a convenient solution, but they can create ongoing maintenance, airflow and safety issues when used as permanent distribution pipework.
Unipipe aluminium pipework offers a modular alternative for industrial compressed air networks, with lightweight pipe and mechanical fittings designed for fixed distribution applications.
Air Energy supplies Unipipe aluminium pipe and fittings Australia-wide. Our team can help with product selection, pipe sizing, technical information and pipework plan reviews.
Call Air Energy on 1300 99 55 26 or explore the Unipipe range.